- Country of manufactureRussia
- Boiler typeSteam
MODULAR STEAM BOILER
UNISTEAM - S
Recovering hard - to - find oil reserves is challenging. Injection of saturated steam into reservoirs is an effective method of recovering hard - to - reach oil reserves. Cyclic steam injection into the bottomhole zone heats up the oil - containing formation, reduces the oil viscosity, increases the formation pressure, which creates a driving force for efficiently directing oil to the producing wells.
Stationary steam generators of the UNISTEAM - S series produce high pressure saturated steam, which is successfully used for solving such problems.
In addition, UNISTEAM - S is successfully used for heating drilling rigs at temperatures of 70 - 75 ° C.
UNISTEAM - S is a fully self - contained steam generator that provides 8 hours of continuous operation without refilling with water.
installations, t / h
boiler, t / h
|Steam temperature, ˚С||140 - 310||140 - 350||140 - 350|
|Steam pressure, working, MPa (kgf / cm)||0.6 - 9.8 (100.0)||0.8 - 15.69 (160.0)||0.8 - 15.69 (160.0)|
|Specific media consumption for the production of 1000 kg / h of steam:||-||-||-|
|- Diesel fuel, l / h||-||-||-|
|- Natural gas, m 3||75||92||92|
|- el. energy, kW||12||15||15|
|- water, m 3||one||one||one|
|Boiler room dimensions, (LxWxH), m||5.4x2.45x2.52||5.4x2.45x2.52||5.4x2.45x2.52|
1st module, kg, no more
DIAGRAM UNISTEAM - S
KUNG 4750 mm long metal frame, divided into 2 compartments (engine room and operator's room) sheathed on the outside with steel sheet 1.2 mm thick, inside sheathed with steel galvanized sheet 0.5 mm thick, insulated with polystyrene foam 40 mm thick, with one entrance door, one door to the operator's room and rear hinged doors for refueling tanks and dismantling equipment, one ladder to climb to the roof, one hatch for steam outlet, one blind window in the engine room, one blind window in the partition, one opening in the operator's room.
PLATFORM 4750 mm long, metal frame, insulated with 40 mm thick expanded polystyrene foam, made with embedded elements for equipment installation.
KITS AND EQUIPMENT:
Spare parts for installation and equipment
Set of lines (6 × 4.2 m)
Corner bends (4 × 90 °)
Sleeve PAR - II (20 m) with lance