In a combination with other products of PurCem it is applied to vertical drawing, the device of galtel and production of other figured details in zones of wear and the increased chemical influence: on food productions, in the dry and damp zones, refrigerators, zones subject to thermal shock; chemical plants; in laboratories; in workshops; on the prepared steel surfaces, it as: steel overlappings; platforms or platforms.
- Excellent chemical firmness. The product is resistant to a wide number of organic and inorganic acids, alkalis, amines, salts and solvents.
- It is developed especially for drawing by a trowel on vertical surfaces. The coefficient of thermal expansion of a covering is close to the corresponding indicator of concrete that provides identical temperature deformation of the basis and covering at a normal temperature cycle.
- Physical characteristics remain in a wide range of temperatures from -40 °C to +120 °C. Adhesive durability is higher than concrete durability on a gap.
- Destruction on concrete. Flavourless. Does not contain the flying organic substances (FOS). High mechanical durability. At blow behaves it is elastic. It is deformed, but does not burst and does not come off.
- High protection against sliding at the expense of a textural surface. High wear resistance due to availability of silicon filler.
- The fast set of durability doing possible journey of transport in 10 hours after laying and also full loading in 12 hours. The idle time is reduced to an absolute minimum.
- Lack of seams.
- Prost in service.
COLOUR: Component A: color liquid; Component B: brown liquid; Component C: gray powder Available colors (approximately): RAL 1001, 1006, 3009, 5015, 6010, 7037, 7038, 7046.
PACKING: Components A + B + C: 22,0 kg block ready to mixing; Component A: 1,60 kg plastic tank; Component B: 1,40 kg plastic canister; Component C: 19,00 kg the laminated two-layer paper package