The drive for oar gate of R21
- Customer pickup,
- Courier
- In detail
Self-locking electromechanical drives of the hidden installation for automation of oar gate with shutters up to 3,5 m wide and weighing up to 800 kg.
Description:
The ideal decision for automation of oar gate of any designs which is not breaking an initial form and design of shutters. Mounted underground, in a special base box, the drive is completely imperceptible.
The motor reducer is put into the case from a special alloy of the titan and aluminum that guarantees absolute resistance to corrosion. The case is equipped with special paronitovy laying and epiploons from fluorine - rubber rubber that does it absolutely waterproof.
The base box is made of the galvanized constructional or stainless steel and always the motor reducer is installed along with gate, it can be mounted later. The possibility of carrying out the delayed installation of the drive allows to spend the budget for construction of gate optimum. Gate lean on the hinge rotating on a sphere from the tempered steel that prevents usual premature wear or instability of system of rotation. |
The built-in mechanical emphasis for restriction of the course of gate considerably simplifies installation. Opening emphasis: discrete adjustment of open provision of a shutter — 6 positions. Closing emphasis: smooth adjustment of a closed position of a shutter.
The self-locking reducer reliably locks gate without use of additional locks which installation is recommended only for shutters over 2,5 m wide. On a case of lack of tension in the power supply network, for opening of gate manually, the system of an unblocking of levers of a base box with a personal key or the standard handle is applied. Both systems are blocked automatically, at the next closing of a shutter. |
Tekhnchesky characteristics
Model | R21/351; R21/352 |
---|---|
Class of protection (IP): | 67 |
Motor power supply (in/Hz): | ~ 220/50 |
Rated power (W): | 200 |
Current (And): | 1.8 |
Intensity of use (%): | 30 |
Thermosafety lock of the motor (°C): | 140 |
Torque (Nanometer): | 300 |
Otkryvayeniye time for a corner 90 ° (c): | 19 |
Mass of the drive (kg): | 13,5 |
Range of working temperatures (°C): | - 25 ÷ +70 |
Article | Description |
---|---|
R21/351 | The motor reducer of underground installation for a shutter up to 3,5 m wide, opening time for a corner 90 ° - 18 sec. |
R21/352 | The motor - the reducer of underground installation strengthened by the additional ball-bearing for a shutter up to 3,5 m wide, opening time for a corner 90 ° - 9 sec. |
FU100 | Base box from cold and galvanized constructional steel, for the R21 series motor reducers complete with a cover, the hinge and the standard transferring levers for opening of a shutter on a corner to 110 ° |
FU101 | Base box from goryache-galvanized constructional steel, for the R21 series motor reducers complete with a cover, the hinge and the standard transferring levers for opening of a shutter on a corner to 110 ° |
FU102 | Base box from goryache-galvanized constructional steel, for the R21 series motor reducers complete with a cover from stainless steel, the hinge and the standard transferring levers for opening of a shutter on a corner to 110 ° |
FU103 | Base box from stainless steel for the R21 series motor reducers complete with a cover, the hinge and the standard transferring levers for opening of a shutter on a corner to 110 ° |
LT300 | Set of accessories for opening of a shutter on a corner to 125 ° |
LT301 | Set of accessories for opening of a shutter on a corner to 360 ° |
RL650 | System of an unblocking of levers of a base box with the standard handle |
RL651 | System of an unblocking of levers of a base box with a personal key |
RL652 | Standard handle of an unblocking |
KT207 | Set of standard accessories to installation of drives of the R21 series |
