- BrandHironic
The device for noninvasive SMAS of lifting Doublo.HIFU Hironic
Technology of influence by the high-intensity focused ultrasound (HIFU – High Intensive Focus Ultrasound) on epidermis, to a term, subdermalny layers and SMAS (superficial musculoaponevroticheskuyu system).
New level of noninvasive SMAS of lifting by means of the device Doublo.HIFU: high extent of control and impact on structures of skin, visibility of deep layers (scanning to 8 mm).
Two functions of ultrasound: visualizing and therapeutic allow to see all layers of soft fabrics in one device, to influence precisely target structures.
Therapeutic mode
In the therapeutic mode – impact on target structures the focused ultrasound with visualization. Generates ultrasonic impulses, creating thermal control points in fabrics at the set depth.
Visualization mode
The sensor transfers images of the site under scanning to the display and allows the expert to determine depth and the place of influence. SMAS is at a depth of 4-4,5 mm, but in practice there is SMAS at a depth of 6,2 mm. For this reason, the visualization mode is necessary.
Indications to application:
Circular face lifting
Flabbiness and obvisany skin under a chin and in a neck
Loss of clearness of a face form, contour of the lower jaw
Deepening of nasolabial folds, omission of corners of lips
Lifting of eyebrows
Features of technology:
HIFU — the technology of the device "DOUBLO-S" is a method of influence by the high-intensity focused ultrasound on deep layers terms and, in particular, on the SMAS area. Earlier similar effect was observed only after surgical intervention in the SMAS areas, other methods of impact on this structure did not exist.
Creation of lines (up to 25 mm long) from thermal control points, identical in parameters. The structure of the line can be varied, by change of distance between the next points. Quantity of points from 1 to 49
Doublo. HIFU creates controlled points of thermocoagulation at a different depth: lower layers terms, SMAS. The type of the sensor determines the influence depth (depth of focus and frequency of ultrasound). Fabrics which are higher and lower than focus remain intact
Under the influence of high temperatures of SMAS contracts, its area becomes less. SMAS is tightened, entraining facial tissues with which it is connected
Visual diagnostics on the display of a medical zone and exact, controlled by the doctor, delivery of the focused ultrasonic radiation to the area of influence. Constant visual control of a zone of influence during the procedure on the display of the monitor
Three types of ultrasonic sensors — D4, D7, M7, do multilevel lifting: deep layers terms, SMAS
Ultrasonic lifting on the device Doublo-S.HIFU
The procedure does not demand cooling and anesthesia
The single procedure, with the effect increasing within 2-3 months
Resistant, within 1 – 1,5 years the expressed effect
Lack of the rehabilitation period
Ultrasonic energy unlike laser and light energy does not depend on skin color and chromophores (not selectively), can be used on any phototype of skin at all seasons of the year
Advantages:
High power is up to 2 J
Two ZhK color touch the display with high resolution for control and management: the top big display (15 inches) — the image control system, the lower small display (7 inches) – a control and management system for ultrasound
The 128-channel sensor does the image accurate. Accurate visual control in real time
Thanks to the double converter (dual transducer), HIFU more exact focusing of energy and excellent quality of a beam in a medical zone for the best result and bigger safety of procedures
Unlike analogs, the sensor of the image and the HIFU converter are divided. The first in a maniple, the second in a cartridge. Such technology allowed to prolong duration of use of the sensor of the image (it is possible to use a cartridge and to carry out procedures without sensor), to increase quality of the image, to increase a resource of cartridges to 10000 lines. When changing a cartridge there is no need to change the image sensor that allowed to reduce cartridge cost
The convenient user interface, the menu in Russian. Bystry installation of the HIFU parameters thanks to the optimum preset protocols of treatment. A uniform window for management of the HIFU parameters
The best ratio of the price and quality in comparison with analogs
The compact and easy device (18,6 kg), is convenient in transportation and movement
Additional mobile support on which the device can be placed for operation, storage and movement
Uniqueness of ultrasonic SMAS — lifting consists that the procedure allows not just to tighten the drooped skin, and to restore former structure of the person, without surgical intervention. Until recently only way of lifting SMAS was up plastic surgery (SMAS plasticity) to standard.
Characteristics:
Energy type — HIFU (High Intensity Focused Ultrasound) – the high-intensity focused ultrasound
Energy density — 0,2 – 2 J/cm2
Sensors — M7 – 7.0 MHz, 3.0 mm; D4 – 4.0 MHz, 4.5 mm; D7 – 7.0 MHz, 4.5 mm
Distance (interval between two points of coagulation) — 0,5 – 10 mm
Line length (interval between the first and last point of coagulation) — 5.0 – 25 mm (a step — 1.0 mm)
The manipulator size — 42 x 85 x 228 mm
Management — the 7th the inch touch screen
Requirements to electricity — 100-240 V, 50/60 Hz
The system size — 400 x 455 x 460 mm
