Snow-white acrylic emulsion Gama-Color Ultra FASAD

• Brand: Gama - Color
• Surface: Concrete, Wood, Putties, Brick, Foam block, Cement plaster, Gypsum plaster, Thermal insulation systems
• Application: for outdoor use
• Material base: water based

description

PROPERTIES

• High weather resistance
• Forms a matte snow - white finish
• Does not turn yellow
• Easy to tint
• Contains fungicidal additive
• Good hiding power and adhesion
• Technological and safe at work
• Vapor permeable, provides "surface breathing"
• Eco - friendly, safe for health

APPLICATION AREA

The paint is intended for facade work on mineral substrates, as well as for painting interiors with high humidity.

SUBSTRATE PREPARATION

The surface intended for painting must be cleaned of dust, chalk and lime whitewash, fragile plaster and putty coatings, oil, bitumen and other contaminants. Degrease, treat with an aqueous solution using detergents, rinse thoroughly with water, dry. Eliminate existing deep surface defects with repair plasters, small irregularities with putties. Prime with Gama Color Ultra Grund to strengthen the substrate, improve adhesion and reduce paint consumption.

PERFORMANCE OF WORKS

Stir the paint thoroughly before use. If necessary, thin the paint with Gama Color Ultra Grund universal acrylic primer to a working consistency, but not more than 10% of the paint mass. Apply paint to the work surface with the chosen tool: brush, roller or spray in 1 - 2 layers. The temperature of the air and the surface to be painted must not be lower than + 5 ° С. For best results, apply the paint in 2 coats with intermediate drying for 2 - 3 hours. Drying time for a single - layer coating at a temperature of + 20 ° C and a relative humidity of 55% : 2 - 4 hours. Carry out painting work in a ventilated area, avoiding drafts. Consumption for one - layer coating: 150 - 250 g per 1 m².

White color. Tinting is possible by hand using colorants, or on tinting machines.

STORAGE

Store for 24 months in a tightly closed container, away from heating devices and electrical devices, protecting from moisture and direct sunlight, in places inaccessible to children, separately from food, at temperatures from + 5 ° С to + 35 ° С . . . Avoid freezing.

PACKAGING

1.3 kg; 4.0 kg; 6.3 kg; 12.6 kg.

SPECIFICATIONS

COMPOSITION: Acrylic dispersion (latex), pigments, fillers, water, special additives.