- BrandDanfoss
- ManufacturerDANFOSS - INDEXTERM SRL
- Country of manufactureDenmark
- Voltage12 V
The room thermostat - the device which regulates work of a gas copper depending on air temperature indoors. We not for nothing pay your attention to air temperature. But we will begin one after another - when at you it is established a gas copper, temperature indoors which it heats, you regulate by increase or reduction of temperature of the heat carrier (VODY) in your system of heating. Inclusion and switching off of a copper happens already depending on whether reached VODA in system of heating of temperature set on a copper. At decrease or temperature increase outside the room, you need to regulate heating temperature on your copper manually again. And these manipulations it is necessary to make all heating season when temperature in the heated room becomes either too cool, or too hot. In such operating mode there are very frequent start-up of a copper for the small period of time. As a rule — once 5-10 minutes for 1-2 minutes of work of a torch of a copper. That is the copper constantly works in the inclusion switching off mode. At the same time the circulation pulser of a copper works POSTOYANNO whether depending on that gas in a copper burns or not. The electric power expense cannot be counted as the 24 kW double-circuit copper during the heating period - it is about 60-90vt/hour. And it is already 1,44-2,160 kW a day or 43-65 kW a month. Not about what comfort, economy and durability of operation of the gas device here out of the question.
How the room thermostat works?
You set on the thermostat temperature necessary for you indoors — for example + 23 °C. At fall of temperature of air on 0,25 °C (a threshold of operation of dependence on thermostat models), the thermostat gives command to a copper on inclusion - the copper begins to work for heating. As soon as air temperature indoors reaches + 23,25 °C the thermostat disconnects a copper. And disconnects not only a torch, and and the pump (we begin to save). Air indoors cools down much more slowly, than water in system of heating, and the frequency of inclusions of a copper is reduced in tens of times that cannot but affect increase in term of operation of the device. Now you do not have need to regulate temperature on a copper manually - once you set it on the thermostat! Became warmer in the winter on the street - a copper all family does not join, gathered in the house, temperature indoors increased — the copper does not join, the sun heats the room through a window - the copper does not join, your apartment to be indoors and neighbour's apartments you warm up - the copper does not join.