|Godex EZ DT2 is full-function continuation of the successful range EZ. It is intended for drawing, the text, graphics and bar codes on a thermal paper or thermolabels of average width in the conditions of small shops, drugstores, warehouses and offices.
The printer of labels Godex EZ DT2 allows to print labels up to 54 mm wide. Quality of the received prints — 203 dpi, and the speed of the press makes about 108 mm / page. Such speed became possible thanks to the fast 32-bit processor and the increased volume of the built-in memory.
As well as other printers of labels Godex, Godex EZ DT2 it is equipped with the sensors defining edges of labels, two types: "on a gleam" and "on reflection". Their collaboration does possible use of materials with any density of a substrate and labels with "black tags". At the same time one of sensors is adjustable thanks to what work with labels of the wrong geometry stops being too labor-consuming and expensive. Physical parameters of labels are set by means of the special program. It is also possible to recustomize the printer in the mode of automatic detection of the sizes of the materials filled in it.
In case there is a need of use for the press of not rolled materials, they are brought to the printer of labels through the special cut provided on a back wall of Godex EZ DT2. Thus the possibility of the press, for example, on a thermocardboard is realized. The standard axis of installation of rolls is equipped by the special holder who protects it from losses.
The thermal printer of Godex EZ DT2 has one characteristic which should be considered at selection — the press is carried out without thermotransfer tape. The self-adhesive labels received as a result it is possible to use no more than half a year. It is connected with the fact that the thermal paper applied to production of labels darkens at long influence of UV rays, i.e. the placed information loses former clearness. As a result, scanners of bar codes can not "read" the code printed on a "old" thermolabel.
The printer of labels Godex EZ DT2 can be connected to the program 1s:torgovlya and the Warehouse 7.7 (the utility which is included in the standard package for this purpose is required), and also to 1s:torgovlya and the Warehouse 8.0 (the driver is connected through Windows).
The design of model is equipped with two interfaces (USB2.0 and RS232), and also system of the indication and management representing a three-colored light-emitting diode and the action button. Printers can be placed not only on a table, but also on a wall — it is no wonder that they are often bought by restaurants for the printing of orders in kitchens.
Besides a standard set of the equipment the Godex EZ DT2 printer can be completed with the following devices: