Multizonal ITC TI60 amplifier

ITC TI60 is supplied with the built-in selector on 5 zones. It is possible to connect up to 5 lines of loudspeakers to its exit. The necessary line is chosen pressing of the button on the forward panel. About 4 sources of audio of a signal, 2 of which priority can be connected to the TI60 amplifier. It is also possible to connect up to 3 microphones, one of which has a priority over other microphones and audio sources, to the block. Levels of linear and microphone entrances are regulated by means of handles on the forward panel. In this block emergency entrances (EMC) on the back panel have the highest priority. When giving on these entrances of audio of a signal (for example: from an emergency source) it arrives on an exit, muffling signals from all entrances.

The output TI60 cascade contains the transformer which in addition increases tension of the strengthened signal. It is necessary for minimization of losses. It is necessary to connect only specialized loudspeakers containing the transformer to high-voltage conclusions of the amplifier. Except high-voltage, the amplifier also has standard "low-impedance" conclusions, for connection of standard speaker systems.

Adjustment of strengthening is carried out by means of the regulator on the forward panel of the ITC TI60 block.
Power supply of the amplifier is carried out from a source of an alternating voltage 220B. Structurally the block is executed in the rekovy 19-inch case intended for installation in a standard electrotechnical case.