Loudspeaker wall MASK4T series
- Customer pickup,
- Courier
- In detail
- Installation methodWall mounted
The loudspeaker has the built-in transformer for connection to the 100-volt line. At inclusion in round of the built-in transformer, a loudspeaker has an impedance of 16 Ohms - it allows to connect in parallel 2 and more such loudspeakers to one channel Hi-Fi of the amplifier.
Let you be not frightened by an impedance of 16 Ohms, APart MASK4T will play also loudly as well as other loudspeaker with an impedance of 8 Ohms! Switching of the modes of 100 V/16 Ohm is carried out by means of the switch on the back panel.
The loudspeaker is made of shock-resistant plastic. Protective lattice removable. LF the loudspeaker is impregnated with special solution, contacts for connection to the amplifier and the switch of the modes on the back panel are protected by a rubber casing that allows to use APart MASK4T-BL not only indoors, but also on the street. The special form of loud-hailers of VCh and LF of loudspeakers provides a wide cover zone. Besides loudspeakers are directed on 50 down - it allows not to incline a loudspeaker at installation.
| Impedance | 16 Ohm / 100 V |
|---|---|
|
Power is 100 V |
2,5 - 5 - 10 - 20 W (4k - 2k - 1k - 500 Ohm) |
| Power is 16 Ohms | 70 W |
| Strip of frequencies | 80 Hz - 20 kHz |
| Nominal sound pressure | 89 dB |
| Protection class | IP64 |
| Sizes | 223 x 129 x 130 mm |