Installations for whitewashing of walls and painting

Available there are installations for whitewashing of walls and painting:

1. Installation painting SO-244

For giving on sleeves and drawings on the processed surface of water painting structures. Installation can be used for giving and drawing water fireproof structures and thin plasters. A climatic modification At, category of placement 1 on GOST15150-69 at a temperature of air from 0 to 40 of 0C. Food of installation is carried out from the three-phase alternating current main with a frequency of 50 Hz, of 380 V. For putting fillings, fireproof structures and thin plasters to a spray of installation compressed air pressure of 0,6 MPas and an expense not less than 0,5 m3/min. moves.

Maximum working pressure, MPa 1,5

Productivity, m3/h, not less than 0,36

Engine capacity, kW 0,55

Overall dimensions, mm, no more than 1400х700х1100

Overall dimensions (length/width/height), mm 290130610

Weight (without ZIP), kg, no more than 46

2. Installation for drawing painting structures of SO-169

For transportation and drawing on the processed surface by method of airless dispersion of various solutions. It can be painting, fireproof, disinfecting, oil, glue and other structures with the content of acids, alkalis no more than 20 percent (excepting nitric acid), mobility no more than 50 pages. It can be used for giving by method of air dispersion of water fireproof structures, and also oil and glue fillings that is provided with a universal rod. At the same time it is necessary to replace a nozzle (from set of replaceable parts and to connect air to a rod (via the available nipple). Productivity, when drawing painting structures, not less, than a m3/hour 0,30 Maximum working pressure, MPa 2 Power consumptions of kW, no more than 0,76 Tension, B 380 Sleeve of DxL, mm x m 16х15 Overall dimensions, mm (length/width/height) 900/500/700 Weight, kg 40

3. AIRBRUSH OF MANUAL ACTION OF PISTON KRDP-4

For coloring of surfaces by method of airless dispersion by water emulsion, water-cretaceous, water-limy painting structures with a density up to 1.3 x 103 kg/m3 when performing paintings. It is possible to spray the fireproof, disinfecting, moistening, glue, washing and other solutions in the industry, construction, agriculture and life, including it can be applied to spraying of fruit-trees, bushes and vegetable cultures. Technical characteristics of an airbrush of KRDP-4 allow to process easily and quickly surfaces of the big area. Without the construction woods and ladders drawing on height to 3,0 is possible... And in 1 hour to process 3,5 meters to 150 sq.m. surfaces. At the same time you will not be tired because you will press the airbrush handle with effort only 15 kg and only 20 times down a minute. during the work of an airbrush you do not need to pull constantly the trigger, the airbrush is equipped with a lung in work as the spherical crane thanks to which you can establish the required material consumption a torch of a raspyl. The main advantages before analogs: - compactness and small weight (up to 3 kg less); - simplicity of service (service of the soaking-up and delivery valves is not required); - hard-alloy raspylitelny nozzle; - competitive price. Our airbrush truly will serve you for many years. The airbrush is completed with a set of accessories: the transparent, easy polyvinyl chloride reinforced sleeves and a rod, and also a set of spare parts.

Use of KRDP-4 will help you to increase quality of the performed works, to reduce the cost of processing of square meter due to reduction of labor and material inputs.

Expense on water, l/min 1,4

Working pressure, MPa 0,50,1

Productivity, sq.m/hour 250

Weight, kg, no more than 6,2

Overall dimensions (length/width/height), mm 290130610

The sleeve which is soaking up DhL, mm x m 10 x 1,5

Sleeve pressure head DxL, mm x m 6,3 x 3,5