- Country of manufactureMoldova
- State of the materialReady mixture
Hard putty for internal works of Satroc of 5 kg the Article 15.602
Filling for internal works.
It is used for finishing and vocational training of surfaces for different types of finishing works (coloring, decorative finishing by marble plaster, the Venetian plaster, etc. ). It is applied on concrete, cement, plaster surfaces, gypsum cardboard, a brick, fortan, a natural stone and others.
Akrilatny water emulsion, softeners, napolniktel, additiva,
High - quality shpatlyovochny weight, ekologikchesk pure, does not contain solvents, flavourless. Thanks to a new formula and smaller fraction, $ ATROC - it is elastic and practical in work that pozvoklyat to receive ideally smooth, easily ground, painted surface.
It is ready to application. Does not demand dilution. For internal works.
It is used for finishing and vocational training of surfaces for different types of otkdelochny works (coloring, decorative finishing by mrakmorny plaster, the Venetian filling, etc. ). It is applied on concrete, cement, plaster poverkhknost, gypsum cardboard, a brick, fortan, natural kakmen and others.
PREPARATION OF THE BASIS:
The surface has to be dry, pure, strong, cleared of water - repellent substances (fatty, bituminous spots, etc. ). Before application carefully to mix. The usual bases to process a primer of "SUPRATON EXTRA" or "TUFFUHGPUHT", unabsorbed surface moisture - a primer of "BETOHGPUHT".
METHOD OF APPLICATION:
It is applied on a surface with the pallet from stainless steel and leveled. Thickness of a nonshrinking layer of filling - 1,0 - 1,5 mm. Each subsequent layer naknositsya after drying previous. After a vysykhakniya to smooth out a small emery paper.
To carry out works at a temperature from + 5 °C to + 25 °C. Not to mix material with other paints, fillings, thinners.
Depending on a condition of a surface, the expense sokstavlyat 0,5 - 0,7 kg/sq. m.
At a temperature of + 20 °C, depending on thickness of a layer and humidity of air - 6 - 8 hours.
To store in a tight company container, at a temperaktura from + 5 °C to + 25 °C, in the dry and protected from solnechkny beams places.
PERIOD OF STORAGE:
Plastic buckets of 17 kg -