Currency MDL
Groz-Beckert needles for automotive industry buy in Chişinău
Buy Groz-Beckert needles for automotive industry
Groz-Beckert needles for automotive industry
igly_groz_beckert_dlya_avtomobilnoj_promyshlennosti
igly_groz_beckert_dlya_avtomobilnoj_promyshlennosti

Groz-Beckert needles for automotive industry

In stock
Reconfirm the price with seller
Payment:
Shipping:
Seller
Moldova, Chişinău
(View map)
+373 
Display phones
10
10 years on Allbiz
Technical characteristics
  • BrandGroz-Beckert
Description

Automotive industry — ideal seams in a car interior.

In automotive industry special attention is paid to ideal appearance of zakrepochny and decorative seams. From luxury and hi-tech sports cars to ordinary family cars — processing of seams has to be ideal in all types of the materials used in an interior. From the point of view of safety of the requirement to quality of seams are in the center of attention.

Constant introduction of innovations and long-term experiment of the Groz-Beckert company on production of needles for automotive industry guarantee perfection of seams and the highest satisfaction of clients.

Internal finishing of interior of the car with needles for the sewing equipment Groz-Beckert

Suitable edge of a needle for the required appearance of a seam on skin

  LR edge

Cuts skin at an angle of 45 degrees concerning the direction of giving, with an inclination to the right. Depending on skin, the easy or average inclined provision of thread. Sewing thread slightly acts from above. Places of a puncture a needle are well visible. Perhaps average and short distance between stitches.

Application:
For performance of decorative seams on skin of small, average and big hardness. It is applied to all types of skin.

Edge of LL
Cuts skin at an angle of 45 degrees concerning the direction of giving, with an inclination to the left. Extremely direct provision of a seam. Sewing thread slightly acts from above. Places of a puncture are substantially closed by a needle. Perhaps average and short distance between stitches.

Application:
For creation of rectilinear seams with the continuous closed appearance. It is applied almost to all widespread types of skin.

S edge
Cuts skin in the direction of giving. Rectilinear seam. At certain kinds of leather and the corresponding length of a stitch strong tightening of thread in skin. Places of a puncture a needle have the longitudinal form and are well visible in a seam. Perhaps average and short distance between stitches.

Application:
For creation of rectilinear seams with rather strong tightening of thread in skin. It is applied to skin of small and average hardness.

SD edge
Round edge with a zapolirovanny trihedron in a regional area of an edge. Rectilinear seam. Sewing thread slightly acts from above. An easy triangular section in skin. Perhaps average and short distance between stitches.

Application:
For the rectilinear provision of a seam (slightly uneven). For soft skin (For clothes). At polydirectional options of application. For skin of big hardness, and also both DH edge, and an edge of D are suitable for the average and big length of a stitch.

Use of various materials in automotive industry with Groz-Beckert needles

R edge
Normal round edge
Application:
Standard for a chain stitch (FST 301). Woven materials, iskusstenny skin, woven materials with a covering.
RG edge
Round edge with a small ball edge.
Application:
Standard for a chain stitch (FST 401 and 406).
FFG edge
Easy ball edge
Application:
Jersey generally, woven materials from cotton and synthetics.

General recommendations about the choice of thickness of a needle and form of an edge for the equipment of interiors of cars.

  Material Edge form * Needle thickness *
  Skin
with duplication and without duplication by foam rubber
Decorative seams: LR, LL, S (certain provisions of a seam)
R, RG,SD,DH
Recommendation:
Application of a needle of SAN12
No. 110 — No. 140
Zakrepochny seams and polydirectional sewing operations:
R, RG,SD
No. 90-№110
(depending on thickness of sewing thread)
  Imitation leather
with duplication and without duplication by foam rubber
Decorative seams: LR, LL, S (certain provisions of a seam)
R, RG,SD,DH
No. 110 — No. 140
Zakrepochny seams:
R, RG,SD
No. 90-№110
(depending on thickness of sewing thread)
  Combination of materials
Skin / imitation leather
with duplication and without duplication by foam rubber
Decorative seams: LR, LL, S (certain provisions of a seam)
R, RG,SD,DH
No. 110 — No. 140
Zakrepochny seams:
R, RG,SD
No. 90-№110
(depending on thickness of sewing thread)
  Combination of materials:
Fabric/felt
R, RG No. 110 — No. 140
(depending on material and thickness of sewing thread)
Combination of materials:
Skin/felt
DH, D
Combination of materials:
Cardboard/felt
DH, D
Combination of materials:
Skin/textiles
Artificial skin / textiles
R, RG,FFG No. 90 — No. 120
(depending on material and thickness of sewing thread)
Woven materials
with duplication and without duplication by foam rubber
R, RG,FFG No. 90 — No. 120
(depending on material and thickness of sewing thread)
The jersey (weaved and knitted)
with duplication and without duplication by foam rubber
RG,FFG No. 90 — No. 110
(depending on material and thickness of sewing thread)
Plastic edging R, RG
Recommendation:
Application of a needle of SAN5
No. 120 — No. 140
Safety cushion R, RG
Recommendation:
Application of a needle of SAN5
No. 140 — No. 180
(depending on material and thickness of sewing thread)
Seat belt R, RG
Recommendation:
Application of a needle of SAN5
No. 160 — No. 230
(depending on material and thickness of sewing thread)
The rug bordered R, RG
Recommendation:
Application of a needle of SAN5
No. 140 — No. 230
(depending on material and thickness of sewing thread)

* The general recommendations about the choice of a form of an edge of a needle and its thickness are provided in the table! The choice of a form of an edge depends on the required stitch form. And the choice of thickness of a needle — from material and quantity of layers.

Needle for the sewing equipment SAN5 GEBEDUR and its advantage

Production of technical textiles even more often demands diverse combinations of various materials. Sutural compounds of extremely solid materials with the woven and knitted materials which are often glued or duplicated by foam rubber are not a rarity. At the same time desire of receiving accurate and strong seams imposes strict requirements to needles for sewing machines.

Developers of needles for the sewing equipment Groz-Beckert SAN5 set before themselves the purpose of elimination of the known problems of application: deviation of needles, pasting of punctures, inaccurate appearance of seams. As a result, needles of Groz-Beckert SAN5 provide obviously more uniform appearance of seams in all directions of a line. These needles can effectively be applied to sewing processing of details of interior of the car.

Advantages of technological development of a needle to the sewing machines SAN5:

  • High efficiency thanks to reduction of idle time of the sewing equipment;
  • Reduction of production expenses;
  • High protection against admissions of a stitch when processing garments;
  • Careful attitude to the sewed material;
  • Perhaps extremely close provision of a petlitel to a needle;
  • Reduction of an expense of needles for automotive industry;
  • Optimum sparing relation to an edge of a petlitel;
  • High protection against wear thanks to GEBEDUR covering.

GEBEDUR covering in needles for tailoring of details of interior of the car in comparison

Thanks to a covering nitride of the titan of a needle from Groz-Beckert GEBEDUR have high degree of protection against wear and damages. It allows to receive high quality of a seam and high efficiency even at operation of a needle in such difficult conditions as automotive industry.

Special needle for the sewing equipment SAN12

Thanks to new development of needles with the cutting Groz-Beckert edge performed by SAN12 it was succeeded to improve a type of a seam at a double decorative line, both for seams with inclined, and for seams with a rectilinear arrangement of stitches. Achievement concerns as use in sewing processing of details of interior of the car of needles of SAN12 LR, and SAN12 S needles, thanking exact adjustment of geometry of cutting by means of a special surface of a flask. Besides, it serves as difference of needles of SAN12 from standard needles for industrial sewing machines.

Examples of uneven appearance when using standard needles for sewing machines

Examples of uniform appearance when using needles performed by Groz-Beckert SAN12

Application of a needle for the industrial sewing machines Groz-Beckert SAN12 LR
To achievement of uniform and harmonious appearance of a seam with the inclined provision of stitches SAN12 LR it is applied only on the right needle of the two-needle sewing machine.
Application of a needle for the industrial sewing equipment Groz-Beckert SAN12 S
To achievement of a uniform, rectilinear seam of SAN12 S it is applied on both needles of the two-needle sewing machine.
Contact the seller
Groz-Beckert needles for automotive industry
Groz-Beckert needles for automotive industry
Shipping method
Payment method
Compare0
ClearSelected items: 0