Glue for a parquet of Chimiver Sigol RE

The two-component epoxy and polyurethane glue which is not containing water and other solvents, intended for laying of a parquet from any breeds of wood of any sizes, including also a massive board.




Specifications
Ratio of components: 9:1
Drawing temperature: + 150C ÷ + 250C
Drawing: gear pallet
Drawing time: 2 hours (at a temperature of 20 °C and relative humidity of 65%)
Hardening time: 36-48 h (at a temperature of 20 °C and relative humidity of 65%)
Expense (when drawing by the pallet): 1400-1600 g/m2 depending on material and flatness of the basis
Color: oak (beige)
Period of storage: 1 year (in the closed original packing at a temperature + 150C ÷ + 250C)
Packing (plastic buckets): 10 kg (9+1)
Means for cleaning of tools: solvent

Application

The basis has to be dry, pure, strong. Carefully mix 2 SIGOL R.E components and evenly apply with the gear pallet on the pure basis. When laying a parquet be convinced that parquet levels are laid by a row, and well press to make sure that glue evenly spread on a surface of levels. 24 hours later resume putting glue. If it is necessary to paste a parquet on the vitreous basis (it as a ceramic tile, an enamel tile or polished marble, etc.), it is necessary to give to the basis a roughness before to paste elements. The subsequent polishing is possible in 3-4 days depending on atmospheric conditions and humidity of parquet levels.

Other scopes
gluing zvuko-and heat-insulating panels (stopper, polyurethane foam, insulating material)
gluing of tiles on asbestine cement and a chipboard
gluing of a tree and construction materials (ceramics, marble pottery) on the metal basis.