- TypeDisc harrow
Device and work
In the transport situation BDST - 2,5 it is used as the hinged tool (Fig. 1) (for convenience when transporting), and into position used as the hook-on unit (Fig. 2). Transition from one situation to another is expedited very much and simply and for this purpose enough participation of one worker.
The harrow consists of 4 disk batteries, mounted in the form of a letter V. On forward batteries disks - cut (1), are intended for crushing of the vegetable remains and their zadelyvaniye to the soil. Disks of back batteries - smooth (2) are also intended to establishment of constant working depth of processing of the soil, excepting the admission of the raw sites.
- Angle of attack. The angle of attack can be adjusted to 300 by means of the hydraulic cylinder (3), for installation of batteries on a necessary corner on a pipe (4) there are 5 openings - four for installation of the corresponding corner in working situation, and one for installation of batteries in transport situation at an angle 00. Change of an angle of attack, the working depth which can reach at most 18 cm changes.
- Lateral exits from a tractor axis. During processing of the soil between ranks of gardens regulation of the unit is possible so that processing of the soil was carried out as it is possible close to trunks of trees, changing lateral exits from a tractor axis, both to the left and to the right for distance to 2,5 m. These adjustments are made by change of an arrangement to the left or to the right drafts of the trailer (5) on a site with openings for fixing (6).
- Big angle of attack;
- Simplicity of service.