Flexible stone - FdS

Flexible clinker tiles in modules on the facade mesh are a modern finishing material that realistically imitates clinker or brickwork, and is used both for facades and for interior decoration of premises. https: //youtu. be/P - LeEDU5QUE

Brick on a grid with a protective film is made by applying a coating of marble chips to a brick of different shades on a flexible base. Meshes are excellent for cutting and bending, superimposed on corners and curved surfaces.

The advantage of installing bricks on a mesh with a film is that the clinker facing brick is already built into the mesh. It is not necessary to glue a single brick, but a whole section. One net consists of 6 rows.
The advantage of flexible brick on a grid is that it does not create stress on the walls and façade. its weight does not exceed 2.5 - 3 kg / m2. Such meshes are lightweight, but strong, which is used for finishing and strengthening facades. It is also used for frame houses, according to Canadian technology, from old bricks, concrete, gas silicate, aerated block, etc.
The material is 100% environmentally friendly, heat - resistant, does not crack, easy to install and easy to transport in a car. Flexible brick for the facade on the grid has proven itself perfectly for finishing also the plinths of houses.
It does not fade in the sun and will last more than 30 years without problems. So he doesn't need any special care.

Flexible clinker tiles, in modules on the facade mesh covered with a protective film - a modern finishing material (fences, wells, flowerpots, barbecue areas, etc. ). It is made of marble or sand chips, under the brick of different shades. Meshes are excellent for cutting and bending, superimposed on corners and curved surfaces.

The advantage of installing bricks on a mesh with a film is that the clinker facing brick is already built into the mesh. It is not necessary to glue a single brick, but a whole section.
Recommended for outdoor use, frost and moisture resistant. Such adhesives are more often referred to as compositions for mosaic works. The same glue serves as a grout.
You do not need to fill each seam on the brick separately, the entire surface is covered at once.
After the adhesive has dried on the wall, the protective film is removed from the flexible clinker. Your facade is ready!