Drives for garage and industrial gate of R41
- Customer pickup,
- Courier
- In detail
Self-locking electromechanical drives for automation of lifting and rotary gate up to 14 m ².
Description:
The design of the R41 series is worked out with special care: as the drive is placed within the inhabited environment important to provide the maximum ergonomics and functionality.
Effective system of adjustment of the course of gate: in an opening cycle the trailer switch stops the movement of a shutter; in a closing cycle at operation of a kontsevik of the electronic engineer shutdown of the drive for 2 seconds detains to allow gate to be closed densely.
The built-in lamp of 40 W enters standard scope of supply for all models, lights up along with turning on of the drive, lighting the place of the parking and dies away a minute later upon termination of maneuver. All cogwheels and the worm screw are made of metal materials, primary transfer — of the tempered steel and bronze. Shaft are established on ball-bearing support. Such thorough decisions yield excellent results: lack of noise, vibrations and high durability of work. |
The self-locking reducer reliably locks gate without installation of additional locks. On a case of lack of tension in the power supply network, for opening of gate manually, the convenient handle of an unblocking is provided. In addition, the drive can be completed with system of a remote unblocking with a cable.
The drive is equipped with the high-precision shlitsevy shaft guaranteeing excellent mechanical adjustment of knots of transmission at installation because of what in system there are, practically, no side plays and the smooth movement of gate is provided. The microprocessor logic provides a wide set of the specialized functions meeting requirements of the most exacting customer. Thanks to the built-in installation of the control unit all installation works and electric connections significantly become simpler. |
Tekhnchesky characteristics
Model | R41/820; R41/821 |
---|---|
Class of protection (IP): | 40 |
Motor power supply (in/Hz): | ~ 220/50 |
Rated power (W): | 200 |
Current (And): | 2 |
Intensity of use (%): | 50 |
Time of full opening (c): | 14 |
Torque (Nanometer): | 400 |
Maksimalnaya Square of gate (m ²): | 14 |
Thermosafety lock of the motor (°C): | 140 |
Mass of the drive (kg): | 8 |
Range of working temperatures (°C): | - 25 ÷ +70 |
Article | Description |
---|---|
R41/820 | The drive without control unit, with trailer switches of opening and closing |
R41/821 | The drive with the built-in control unit and the transformer, with trailer switches of opening and closing |
KT216 | The adjusting basis of the drive, length is 619 mm |
KT217 | The adjusting basis of the drive, length is 2000 mm |
LT305 | Direct telescopic draft of long 800 mm, with the shlitsevy plug |
LT306 | Transmission shaft 200 mm long, complete with a support |
LT307 | Transmission shaft 1500 mm long, complete with a support |
LT310 | Direct telescopic draft of long 800 mm with the smooth cylindrical plug |
RL656 | Set for an external unblocking of R41 with a personal key |
