(View map)
- BrandJet
- Country of manufactureChina
[Diameter of the union of 100 mm, power of 1,5 (1,1) kW, weight is 115 kg]
FEATURES:
- The case of grinding part from an iron casting
- Mobile angular emphasis from a guide along the T-shaped groove
- Floor execution
- Dish-shaped and grinding knot
- Fastening of abrasive circles on "-a flypaper" - (option)
- Desktop from an iron casting
- Adjustment of a tilt angle of a desktop
- T-shaped groove for installation of an emphasis
- Tape and grinding knot
- Desktop from an iron casting
- Adjustment of an angle of installation of tape and grinding knot
- Adjustment of a tilt angle of a desktop
- T-shaped groove for installation of an emphasis
- Lever of a fast tension and weakening of a sanding belt
- Graphite substrate of a sanding belt
Woodworking Powermatic machines, the most popular in the USA, are characterized as the best in a class thanks to what are recognized "-the gold standard"-. Model 31A completely corresponds to brand: it is the powerful machine made strongly and thoroughly. Configuration – floor, in a curbstone support the powerful engine and a 100-millimetric branch pipe of a pyleotsos is placed. The top part of the case of the machine pig-iron, both desktops also are made of the same material. Each of them is regulated on a tilt angle, and the table of dish-shaped knot turns not only on 45 ° - down, but also on 15 ° - up, and the table tape can be established is longitudinal. The angular emphasis from a guide along the T-shaped groove which is provided at both tables is intended for exact works. The tape knot can be established vertically, horizontally or in any intermediate position. Reserved capacities and a massive design with big rigidity provide the accuracy and lack of vibrations, even when performing a hard work.
| Technical characteristics: | |||||||||
| Model | 31A | ||||||||
| The consumed (output) power | 1,5 (1,1) kW | ||||||||
| Diameter of the exhaust union | 100 mm | ||||||||
| Overall dimensions (DKHSHKHV) | 610 x 800 x 1380 mm | ||||||||
| Weight | 115 kg | ||||||||
| Dish-shaped and grinding knot | - | ||||||||
| Frequency of rotation of a grinding wheel | 2400 rpm | ||||||||
| Diameter of a grinding wheel | 300 mm | ||||||||
| Sizes of a desktop (DhSh) | 230 x 430 mm | ||||||||
| Desktop tilt angle | - 15/° ° ° ° - | ||||||||
| Tape and grinding knot | - | ||||||||
| Speed of the movement of a sanding belt | 12 m/s | ||||||||
| Sizes of a sanding belt (ShhD) | 150 x 1220 mm | ||||||||
| Tilt angle of grinding knot | 0-90 ° - | ||||||||
| Sizes of a desktop (DhSh) | 190 x 340 mm | ||||||||
| Desktop tilt angle | 0-45 ° - | ||||||||
-
| Technical characteristics: | |||||||||
| Model | 31A | ||||||||
| The consumed (output) power | 1,5 (1,1) kW | ||||||||
| Diameter of the exhaust union | 100 mm | ||||||||
| Overall dimensions (DKHSHKHV) | 610 x 800 x 1380 mm | ||||||||
| Weight | 115 kg | ||||||||
| Dish-shaped and grinding knot | - | ||||||||
| Frequency of rotation of a grinding wheel | 2400 rpm | ||||||||
| Diameter of a grinding wheel | 300 mm | ||||||||
| Sizes of a desktop (DhSh) | 230 x 430 mm | ||||||||
| Desktop tilt angle | - 15/° ° ° ° - | ||||||||
| Tape and grinding knot | - | ||||||||
| Speed of the movement of a sanding belt | 12 m/s | ||||||||
| Sizes of a sanding belt (ShhD) | 150 x 1220 mm | ||||||||
| Tilt angle of grinding knot | 0-90 ° - | ||||||||
| Sizes of a desktop (DhSh) | 190 x 340 mm | ||||||||
| Desktop tilt angle | 0-45 ° - | ||||||||
Standard complete set:
- Sanding belt
- Grinding wheel
- Angular emphasis
- Emphasis for horizontal works
-
