Decorative lamp street Alura
- Customer pickup,
- Courier
- In detail
- BrandSchreder
- Country of manufactureGermany
Degree of protection | ||
Optical compartment | IP 66 (*) | |
Puskoreguliruyushchy device | IP 66 (*) | |
Crash-worthiness | polymethyl methacrylate | IK 04 (**) |
polycarbonate | IK 10 (**) | |
Aerodynamic resistance | (CxS) | 0,124 m ² |
Rated voltage |
230 V - 50 Hz |
|
Electric class |
I or II (options) (*) |
|
(*) according to IEC - EN 60598 (**) according to IEC - EN 62262 | ||
Weight |
(without PRA) |
9,6 kg |
Materials |
||
Support basis | Goryacheotsinkovanny steel | |
Support (Descobertas) | The central steel core trimmed with a tree (from the stuck together wood sections a flounder). | |
Top cover + cap | Lita under pressure aluminum | |
Consoles | Lita under pressure aluminum | |
Lens | Acryle or cast polycarbonate, transparent or ridge with effect of "hoarfrost". | |
Color |
AKZO gray 900 - sand structure |
ALURA - THE GRACE CHARM!
FOR THE DIRECT AND REFLECTED LIGHTING
Two options of lighting of Alura lamps are offered: direct or reflected.
For both types of lighting symmetric or asymmetric distribution of light is provided.
In addition to numerous photometric opportunities the Alura lamp can be equipped with different light sources.
CHOICE OF THE PHOTOMETRICS
THE REFLECTED LIGHTING:
two shtapelny aluminum top reflectors - varnished and polished with anodizing - are fixed under the top cover; one lower reflector is placed in the lower section of the lamp. An acrylic or cast polycarbonate plafond, transparent or ridge with effect of "hoarfrost".
DIRECT LIGHTING:
one top reflector covered with a white varnish; a plafond from acryle or polycarbonate with effect of "hoarfrost" and a corrugation.
SERVICE
Access to a lamp and the puskoreguliruyushchy device is carried out by weakening of two not dropping out screws on a cap on the top cover of the lamp. After this operation the cap opens turn on a loop.
If a payment of the puskoreguliruyushchy device - built in, then it can be disconnected easily weakening of two not dropping out screws.
INSTALLATION
The Alura lamp is installed on a support by means of six M8 screws.
EXECUTION
CHOICE OF THE PHOTOMETRICS
- PRYAMOE/OTRAZHENNOE LIGHTING is provided by means of the corresponding lens
- DISTRIBUTION SVETA: symmetric or asymmetric for both options of lighting
2 types of support
- Round
- Square
http://www.schreder.com
OPTIONS
FINISHING |
|
Any RAL or AKZO colors on demand are possible. | |
COLOR DISKS |
|
At the reflected lighting it is possible to place color disks for creation of the special light atmosphere in optical sector. | |
miniR® (COMPACT REFLECTOR) |
|
The Alura lamp can be equipped with a reflector of miniR® and the internal lens. |