Currency MDL
Cellular Polygal polycarbonate buy in Chişinău
Buy Cellular Polygal polycarbonate
Cellular Polygal polycarbonate

Cellular Polygal polycarbonate

In stock
Reconfirm the price with seller
Moldova, Chişinău
(View map)
Display phones
Technical characteristics
  • TypePorous
Sizes of the sheet 2,1m x 6,0m = 12,6m2 cost:
Cellular polycarbonate of production of the Izraelsky company POLYGAL without use of secondary raw materials and existence of an extruded layer of UV (for protection against destructive influence of an ultraviolet) The main scope of cellular Polygal polycarbonate are architectural projects of translucent coverings and systems of protections, including: sports constructions (stadiums, gyms, tennis courts, swimming pools, etc.), blockings of transitions, greenhouses, the device of lamps of a ceiling light in civil and industrial buildings, illuminated signs and many other things. It should be noted safety of polycarbonate. In case of damage, the plate does not give splinters. Such property is very important for greenhouse facilities: in case of natural disaster soil of the greenhouse remains pure and without alien objects. Instruction for installation The recommended loadings The POLIGAL (POLYGAL) panels passed tests in the independent, recognized around the world laboratories and institutes. For ensuring the sufficient bearing ability it is necessary to define an optimum step of the bearing designs. It is necessary to notice that often increase in a step of support does not lead to destruction of a covering, and only increases its deflections under loading. But for preservation of esthetic appeal of a construction under any conditions, it is necessary to make calculation of a design and to define necessary distance between support. Specialists of our firm will make necessary calculations and will make to you detailed recommendations for each case. You will be able to get any technical support. Short recommendations about installation and operation It is desirable for POLIGAL (POLYGAL) panel to have so that stiffening ribs were focused along a covering slope. It is necessary to bend panels across stiffening ribs - it will provide formation of an arch with a constant radius of curvature and will increase design durability. It is necessary to remember the minimum recommended bend radiuses. It is stronger possible to bend panels, but only after the corresponding experiments. Besides the bend with a radius, smaller recommended, will reduce the bearing ability of the panel. At installation of the panel it is necessary to leave gaps for thermal expansion. It is better to remove a packing polyethylene film only after installation of panels as on it the party of the panel on which the sun-protection covering is applied is designated (this party has to be located outside). Having removed a film in advance, you risk to install the panel incorrectly. It is not necessary to leave a film not removed a long time after installation - at long-term influence of the sun polyethylene can "stick" to a surface of the panel and its further removal will be complicated. When fixing the panel by means of self-tapping screws it is necessary to ream an opening diameter a little big diameter of the self-tapping screw for ensuring movement of the panel at thermal expansion. For prevention of leakages and a vyryvaniye of the panel at strong wind loading under self-tapping screws it is necessary to use washers with a sealant. This information is fact-finding. For obtaining more detailed instructions address consultants of our firm.
Shipping method
Contact the seller
Cellular Polygal polycarbonate
Cellular Polygal polycarbonate
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0