Ceiling P.I.N. of NEIRS

Heating of the house, or any other room, inhabited or industrial, it is better to entrust our system of heating and our experts.

Let's consider as the system of heating on the basis of P.I.N. (the film infrared heater) of Neirs works.

If your task to involve film infrared heaters of Neirs as the main heating you need to establish P.I.N. of Neirs on a ceiling.

Before installation of P.I.N. of NEIRS it is necessary to close 100% of a ceiling surface the heatreflecting material with the metallized covering (isobosoms, izospan or other similar material) 3-10 mm thick. It is necessary for uniform distribution of heat on all surface.

The area of a covering of P.I.N. of Neirs will depend on that in what climatic zone you are, but not less than 50% of the total area of a ceiling surface.

Ideal option for the majority of regions of 70-80%. Neobkhodimaya Square of a covering of P.I.N. of Neirsrasschityvayetsya specialist of the company

After are mounted by P.I.N. of Neirs we establish a temperature regulator which fastens on a wall at the height of 1-1,5 m from a floor, previously having enclosed 3 layers of the heatreflecting isolation under its basis.

It is necessary in order that temperature of a wall did not exert any impact on its work.

It is very important to establish a temperature regulator in the place, not accessible by drafts and a sunlight, that is at distance from windows and doors.

At connection of system to an electric network there is a heating of a surface of P.I.N. of Neirs to temperature of +45 °C within several minutes.

Infrared beams, having reached a floor surface, heat it, that in turn, by accumulation and transfer of heat to air makes uniform heating of the room.

Having reached the necessary temperature condition, the temperature regulator gives command for shutdown of system.

As soon as temperature falls by 1-2 °C, the temperature regulator closes a chain and the new cycle is repeated.

It should be noted that temperature at a surface of a floor is several degrees higher set, thus the additional effect of a heat-insulated floor is created!

On average the system works no more than 5-10 min. an hour, the rest of the time is spent the saved-up energy that allows to consume from 15 Vt*m2/ch of the heated area at the set comfortable temperature of 23 °C.

Increase or fall of temperature respectively will cause increase or decrease of an expense of the electric power.

At traditional convective heating, heat from radiators rises up, reaching the maximum at a ceiling, a floor remains cold.

After installation of system of heating is made, it is possible to decorate a ceiling surface any material (gypsum cardboard, a tree, a stretch ceiling, suspended etc.), except the coverings containing metal in the structure.

It is also necessary to consider at installation of the P.I.N. system of Neirs that the allocated power on the room was enough for installation of film infrared heaters and household appliances.

If on calculation of the allocated power not enough on the P.I.N. installation of Neirs we offer alternative - it is different logical relays and actuators. Which several times reduce the general peak power of P.I.N. of Neirs without prejudice to system of heating.

The system of heating on the basis of film infrared heaters (P.I.N. of Neirs) is the most advanced, effective and economic of all existing.

When using system of heating you have one more plus - it is huge design potential, in your house there will be no radiators of heating and pipes any more. Which, you see, not each owner of the modern house would like to see at himself.