Autoconcrete 58153C
- Customer pickup,
- Courier
- In detail
- BrandКамАЗ
- Country of manufactureRussia
Standard: Euro 4 Autoconcrete 58153C for receiving the fresh concrete from specialized betonotransportnyh means and supplying it to the horizontal and vertical directions to the place of installation. It is used in paving services: in the construction of high-rise buildings made of reinforced concrete, the construction of bridges, mines, etc .. Autoconcrete equipped with high-technology equipment company "LIEBHERR", Germany betonoraspredelitelnoy with an arrow 37 meters. Technical features: Maximum reliability Concrete-pumping group for an infinitely long work capacity of 125 m3 / h at a low operating cost. Outriggers (autrigirov) type ST-system-removed providing great advantages in their daily work. Intelligent control for efficient and safe operation of the operator. Modern radio control enables to any convenient point to manage all functions of the machine, passing the necessary signals, provides a smooth and steady movement of the distribution boom. The standard kit included backup remote control cable with a length of 50 m. The hydraulic open-loop control system with high precision, whereby high proizvoditeltnost achieved at maximum efficiency, and strong switch S-valve without a pressure limiting. Compact boom length in transport position. Maximum adaptation to difficult climatic and road conditions. Lubrication assemblies manufactured centralized lubrication system Lincoln Quicklub, Germany. Autoconcrete calculated for the temperature operating mode from - 15 ° C to +40 ° C. OPTIONAL: at lower temperatures down to - 20 ° C over separate orders made for special insulation construction of the concrete and a water tank of the modern high-insulating materials. ** - Work at 7 MPa is allowed only during the installation of reinforced concrete pipeline laterals and castles. Pressure 1 MPa supplies concrete mixture depending on its mobility by linear betonovod on the horizontal distance to 30-60 m., The vertical 8-13 m SPECIFICATION MODEL ** - Work at 7 MPa is allowed only during the installation of reinforced concrete pipeline laterals and castles. Pressure 1 MPa supplies concrete mixture depending on its mobility by linear betonovod on the horizontal distance to 30-60 m., The vertical 8-13 m SPECIFICATION MODEL ** - Work at 7 MPa is allowed only during the installation of reinforced concrete pipeline laterals and castles. Pressure 1 MPa supplies concrete mixture depending on its mobility by linear betonovod on the horizontal distance to 30-60 m., The vertical 8-13 m SPECIFICATION MODEL
base chassis | KAMAZ-6540 8x4 |
Load height, mm | 1400 |
The pressure on the concrete mix, developed by betonotransportnym piston MPa | 7.5 |
Concrete pipeline diameter, mm | 125 |
Number of sections | four |
The maximum height of the concrete mix feed boom from ground level / boom., M | 37 / 32.6 |
Power installed, kW | 200 |
The volume of the hopper, m3 | 0.6 |
Technical productivity outlet betonoraspredelitelya m3 / h | 125 |
type of drive | hydraulic |
WEIGHT PARAMETERS AND LOAD
Gross vehicle weight and / m kg | 26000 |
Gross weight distribution, kg | |
at rear truck | 16000 |
the first and second axis | 10000 |
OVERALL DIMENSIONS, MM
Length mm | 12000 |
Width | 2500 |
Height mm | 3950 |
Travel speed, km / h
maximum | 80 |
The angle of rotation BETONORASPREDELITELNOY BOOM, GRAD
vertical | 100 |
in the horizontal plane | 365 |