Acrylic Sealant Standard Acrylic Sealant Penosil

http://cheton.md/ru/

• Brand: Penosil
• Surface: Metal, Concrete, Wood
• Application: for outdoor work, for indoor work

description

PROPERTIES

• Convenient to use
• Virtually odorless
• Forms a plastic connection
• Thixotropic, does not flow along the seam
• Suitable for coloring
• Becomes moisture resistant 5 hours after application to the surface
• High UV resistance

APPLICATION AREA

Filling cracks and joints in walls, between frame and wall, joints between drywall panels and screw holes; correction of surface defects before painting.

SUBSTRATE PREPARATION

The surface must be free of dust, loose particles and oil.

PERFORMANCE OF WORKS

1.The surface to be coated must be dry. It is recommended to prime porous materials with acrylic diluted with water in a ratio of 1: 2. Cut off the upper threaded part of the cartridge and screw on the special tip. The tip must be cut off so that there is a sufficient dispensing hole. Insert the cartridge into the gun and prime the tip by pulling the gun trigger several times. 3. Squeeze sealant into the joint by evenly squeezing the gun trigger and sliding the tip along the joint. After applying the sealant, smooth it out with a rubber spatula and remove any excess. During hardening, make sure that dirt does not settle on the surface of the material and that the surface of the joint is not subjected to mechanical stress. Provide adequate air circulation in all treated areas. 4. The maximum connection size is 30 × 20mm. Attention! ! ! 1. Not suitable: - for joints with significant mobility (more than 8% of the joint width); - for joints in constant contact with water; - for joints with bituminous surfaces; - poor adhesion to glass and some plastics, with untreated metal - may cause corrosion. Cleaning: 1. Use a cloth dampened with water or PENOSIL Premium Cleaning Wipes or water to remove uncured sealant. 2. Remove cured sealant mechanically and then with a damp cloth. Curing time at a temperature of + 23 ° C and a relative humidity of 50% : film formation - 4 - 5 minutes, hardening speed 2.5 - 3.0 mm / 24 hours. White color.

STORAGE

Store within 12 months in a dry and cool place at temperatures from 0 ° C to + 25 ° C. Short - term cold resistance - 10 days at temperatures down to - 18 ° C.

PACKAGING

280 ml

SPECIFICATIONS

Composition: Acrylic dispersion, water, fillers.